Ir para o conteúdo principal

iPhon 6s both camaras not working

Hello everyone,

I've a problem with a iPhone 6s, 1 path is missing next to the wifi chip, can someone help me where I need to make a jumper?

right now the cameras and flashlight are not working.

please look picture!

Best regards Marvin

Block Image

Updaten (26-04-17)

Hello @refectio ,

do you mean this? look picture please!

Block Image

Respondido! Ver a resposta Também tenho esse problema

Esta é uma boa pergunta?

Pontuação 0
Adicionar um comentário

3 respostas

Solução escolhida

Hello Marvin. You will need to create a micro-jumper from the bottom pad (the one that is missing) of FL3104 to either C3106 or C2109. See the attached image, I have highlighted them for you. The connection point on those capacitors is on the top pad (based on the image orientation).

Block Image

Do you have the proper tools and experience to do this kind of work? If not, then you should look for a qualified micro-solderer to do this repair.

Esta resposta foi útil?

Pontuação 4

4 comentários:

Hi!!,

Thanks for your answer, I appreciate this.

I'll let you know if I fix the problem.

por

That looks right. Have you tested the phone with this fix?

por

@refectio sorry for late responge, but it doesn't work. both sides have high resistance.

por

High resistance relative to what, ground? Measure on both sides of the filter to see if is okay. It should read close to 0 Ohm. If you measure a side relative to ground, then it should be high resistance.

por

Adicionar um comentário

Jump to C3106 its under shield (bottom at your photo)

Esta resposta foi útil?

Pontuação 2

1 comentário:

I don't know where to find C3106, can you please help me.

por

Adicionar um comentário

https://www.youtube.com/watch?v=2FbBo2q_...

Esta resposta foi útil?

Pontuação 0
Adicionar um comentário

Adicionar a sua resposta

Marvin será eternamente grato(a).
Exibir estatísticas:

Últimas 24 horas: 0

Últimos 7 dias: 0

Últimos 30 dias: 0

Duração total: 277