Ir para o conteúdo principal

Lançado em 16 de setembro de 2016. Modelo 1660, 1778 Disponível como GSM ou CDMA / 32, 128 ou 256 GB / Ouro Rosa, Dourado, Prateado, Preto Mattte e Preto Brilhoso.

2261 Perguntas Visualizar todos

Darks Spots on screen after replacement

Hello, I've started fixing iPhone 7 recently and have had issues with backlights after replacing screens. It happened multiple times. I've made sure the battery is unplugged at any time when I'm working on the board. Do you guys have any more suggestions on how to prevent that damage when repairing iPhone 7. Thank you

Update (03/31/2017)

Block Image

here is a picture of my issue

Responder a esta pergunta Também tenho esse problema

Esta é uma boa pergunta?

Pontuação 1
3 comentários

Hmm uncommon issue where do your get your screens from?

por

In my opinion there is a circuit connectivity issue so please try check which element in the circuit is damaged.

por

This is mostly a LCD connection issue from logic board.

Usually the FPC connector for LCD plug in on board. Either damaged, not connected properly or at worst backlight circuit issue.

por

Adicionar um comentário

2 respostas

Pergunta mais útil

I would suggest you try a different supplier for your parts as a test. It seems like you are getting bad parts which come in batches from time to time.

Esta resposta foi útil?

Pontuação 4

1 comentário:

I would agree. It seems to be what im thinking as well. I would maybe try Mobiledefenders.com Prime parts there a little more expensive but ive never run into this issue with them

por

Adicionar um comentário

1: maybe screen connection, try more time at screen and logic board connection

2: maybe the screen backlight soldering not good , try soldering one more time with soldering paste

Esta resposta foi útil?

Pontuação 0
Adicionar um comentário

Adicionar a sua resposta

Chris será eternamente grato(a).
Exibir estatísticas:

Últimas 24 horas: 0

Últimos 7 dias: 0

Últimos 30 dias: 0

Duração total: 162