iPhone 6 can't go pass the apple logo after proximity/front facing cam

Hey guys,

I have just replaced proximity/front facing camera flex but not phone does not go further then apple logo. But if I disconnect proximity/front facing camera flex it boots just fine. I have tried home+power but the problem remains. Is it bad proximity/front facing camera flex?

Respondido! View the answer Também tenho esse problema

Esta é uma boa pergunta?

Pontuação 0
Adicionar um comentário
Spread Fixmas Cheer
Get $12 off your purchase of $50 or more with code FIXMAS12
Spread Fixmas Cheer
Get $12 off your purchase of $50 or more with code FIXMAS12

3 Soluções

Solução escolhida

Try a new from camera cable and see if that works. These are often defective and can be damaged easily. Was this the original one or a replacement?

Esta resposta foi útil?

Pontuação 3

Comentários:

It is a replacement. I am just worried if it is even possible to get it working if it is not original one? I will ask seller for replacement.

por

That is why. Replacements very, very, very often defective. Don't know why, but they are.

por

Adicionar um comentário

Possibly is a bad prox but try to plug in the prox while the device is powered on as well.

Esta resposta foi útil?

Pontuação 0

Comentários:

I have just tired that and when I go to camera app front camera shows black screen. If I restart the phone it continues with a boot loop.

por

Adicionar um comentário

dissconect the front cam and power on the phone if it boots in system try another front cam

Esta resposta foi útil?

Pontuação 0

Comentários:

I have already mentioned that it boots if I disconnect proximity/front camera flex.

por

sorry i did't read that but don't try again to put that fron cam because it may damage the motherboard

por

Adicionar um comentário

Adicionar a sua resposta

Karolis será eternamente grato(a).
Visualizar Estatísticas:

Últimas 24 horas: 0

Últimos 7 dias: 0

Últimos 30 dias: 0

Todo: 52