Rep: 13
2
Repaired my screen and now my phone won't turn on. There was no water damage and it worked great before the repair. Any ideas what I should do to try restarting it? It's plugged in. I tried reset by plugging in and holding home and power button at the same time for 10 seconds
Esta é uma boa pergunta?
Rep: 221,4 mil
15
289
806
You say it won't "turn on". Have you tried connecting it to iTunes to see if it is recognized?
Couple of things to look for:
Esta resposta foi útil?
Rep: 16,1 mil
39
92
13
Is the battery connector plugged in? Does iTunes recognize it?
Esta resposta foi útil?
I installed iTunes and it recognizes my phone but asks me to confirm something from my phone but there is no power to my screen. So I believe it recognizes the device but is still unresponsive.
@aprilhend Try to re-connect the LCD cable, the phone is on but just not displaying anything. If it still doesn't work, I think you got a defective screen.
Thank you. That is what I am thinking as well.
Rep: 3,1 mil
5
2
1
Maybe backlight is defect, can you see any image on the screen when you look on a angle at the screen?
Esta resposta foi útil?
There is no image, no color, no back light, or anything that shows on the screen. When I plug it into the wall it does not show a battery charging, etc. If a defect what do I do?
Rep: 103
3
if its I phone You have to turn it off before changing LCD , For you try to Restart The phone By holding Power+home Button For more than 15 sec ! try many times
Esta resposta foi útil?
The OP already tried that.
I tried that. Multiple times. I have written iFixit and they want me to take apart and take pictures of all connectors. Thinking I will reinstall my cracked screen and return the product that isn't working on my phone...
Últimas 24 horas: 0
Últimos 7 dias: 0
Últimos 30 dias: 0
Duração total: 107
