Ir para o conteúdo principal

Conserte seus objetos

Direito de executar reparos

Peças e ferramentas

Model A1199 / 2, 4, or 8 GB capacity

103 Perguntas Visualizar todos

The 1.1.3 firmware release doesn´t work in my iPod

Hi

I was aplied the 1.1.3 release of firmware to my ipod, however after that the screen turns on blank, i can hear the wheel work but all screen is blank, when i apply a reset, this fix the problem, but when the ipod is auto off, the problem is present again.

I think that the problem is for the firmware version and could be fixed with the previous version 1.1.2 or erlier, but i didn´t can to find it. would you have this firmware? or what should be the problem?

Responder a esta pergunta Também tenho esse problema

Esta pergunta é pertinente?

Pontuação 1
Adicionar um comentário

Kit de pontas universal para chave

112 bits for every fix.

Upgrade Your Toolbox

Kit de pontas universal para chave

Upgrade Your Toolbox

1 Resposta

Pergunta Mais Útil

Here is the link to a site that might have the firmware you are looking for. It also gives you the driections how to perform the shift-click (for windows) maneuver. Good luck.

http://www.felixbruns.de/iPod/firmware/

Esta resposta foi útil?

Pontuação 1
Adicionar um comentário

Adicionar a sua resposta

cesar g r será eternamente grato(a).
Exibir estatísticas:

Últimas 24 horas: 0

Últimos 7 dias: 1

Últimos 30 dias: 2

Duração total: 1,739