Ir para o conteúdo principal

No Charging after Battery replacement. Old one has no function too.

Hello!

i put in a new battery into my iphone 5 (the old one was still working but wouldnt hold long), after replacement of the battery the phone worked fine. but after the first discharge it showed the battery logo with 3 small red stripes, it does recognize the charging cable but it won`t charge even after 12h+ of loading at the charger.

i thought maybe the new battery is dead so i installed the old working battery again and had the same problem like the new one. did i break something on the board or is there a fix for this?

i did battery repairs on iphones before and never had a problem, so i guess something is wrong here?

/are there any schematics so i could measure the current on the board?

Responder a esta pergunta Também tenho esse problema

Esta é uma boa pergunta?

Pontuação 1
Adicionar um comentário

2 respostas

I've come across this problem in the past and spent many hours seeking solutions. Unfortunately, the best conclusion I could reach, is that something on the logic board was damaged when disconnecting the battery. This implies that you now a defective logic board and shouldn't expect to find any easier solution that replacing it.

Esta resposta foi útil?

Pontuação 0

1 comentário:

thats my thought too, but i`d like to verify this with a measurement.

/also it worked after the replacement. it stopped working after the first discharge.

por

Adicionar um comentário

TriStar switching ic switches between mains and battery (u2)

Esta resposta foi útil?

Pontuação 0
Adicionar um comentário

Adicionar a sua resposta

einself será eternamente grato(a).
Exibir estatísticas:

Últimas 24 horas: 0

Últimos 7 dias: 0

Últimos 30 dias: 0

Duração total: 30