Ir para o conteúdo principal

sim car reader soldering point damage

i tried to replace sim card reader..but bymistake i damged that point where sim card reader conector soldering..plz check my picture..https://i.imgsafe.org/c57debf6dc.jpg .

Block Image

sry for poor english,..

plz help me as soon as possible.

Respondido! Ver a resposta Também tenho esse problema

Esta é uma boa pergunta?

Pontuação 1
1 comentário

Hi, i have the same problem. could you resolve this problem??

por

Adicionar um comentário

1 resposta

Solução escolhida

2 of those three pads connect to the BaseBand IC so they definitely need to be connected. You may want to see if there is a trace that extends beyond the pads but my suspicion is that they go directly through the board layers to come out the other side to connect to VR3101_RF. You will be able to run jumper wires and complete the connections.

Do a search on Google to find the schematics for the iPhone 6 and you will see where they connect.

Esta resposta foi útil?

Pontuação 4
Adicionar um comentário

Adicionar a sua resposta

alok kumar será eternamente grato(a).
Exibir estatísticas:

Últimas 24 horas: 0

Últimos 7 dias: 0

Últimos 30 dias: 0

Duração total: 132