Rep: 3,1 mil
26
5
8
Hello,
Anyone have any ideas on a screw kit that would cover this very small micro screw? Or maybe a single screw driver... I prefer wera brand.. Anyhow thanks in advance for any help.
.. I think the screw head it is about 2.38mm in diameter if I
measured it correctly. Its very very small.
Esta é uma boa pergunta?
Rep: 448,1 mil
11
366
1,4 mil
Hi,
I think that it is a Torx head screw.
Here is a link describing Torx head screws.
https://en.wikipedia.org/wiki/Torx
Judging by your description it will be roughly a T8 size. (2.31mm point to point distance)
Here is a link to just one supplier of the brand that you want.
Esta resposta foi útil?
@jayeff the way I read the question, it is the complete screw head that is 2.38mm, not point to point. I'd go with a sizeT1 orT2
You are right that was the complete screw head. Thanks so much i got a hold of a T2 and it worked perfectly. Thanks again!!
Hi @oldturkey03
Thanks for that. As my old school teacher used to say to me a long, long time ago ... read the question John!
Últimas 24 horas: 0
Últimos 7 dias: 0
Últimos 30 dias: 0
Duração total: 81
