Ir para o conteúdo principal

Repair information and guides for the CDMA version of the fourth generation iPhone. Model: A1349 / 8, 16, or 32 GB storage capacity

295 Perguntas Visualizar todos

Can't get top right corner screw back in.

I took apart my iphone 4 and, as expected, had trouble removing the top right screw (near the audio jack). Now that I am trying to reassemble, I CAN NOT get the screw back in. I have been working on it for an hour.

I am using the tool kit from ifixit and the screw driver hand is too thick to be able to get a direct line on the screw. I need some advice on how to proceed.

1. Is their a screw driver with a longer thinner shaft that might work?

2. What happens if I leave the screw out altogether? (I did try that but the reassembled phone is unresponsive.

Any other ideas?

Responder a esta pergunta Também tenho esse problema

Esta é uma boa pergunta?

Pontuação 1
Adicionar um comentário

1 resposta

Pergunta mais útil

Hi !

As long as this screw is a contact screw, there's no surprise about your phone not responding once reassembled.

I suggest that you use different screwdrivers, not being able to give you an accurate reference as long as I no longer own an iPhone 4. If you still can't manage to screw it or that the head is a bit damaged, some tools sold f.e. at iFixit may help you. I personally use this one for damaged screws.

Imagem de Screw Extracting Pliers

Produto

Screw Extracting Pliers

$19.99

Esta resposta foi útil?

Pontuação 1

2 comentários:

The screw head is still undamaged. I just can't get the screw driver and driver head alligned.

por

Have you tried with a flat one ?

por

Adicionar um comentário

Adicionar a sua resposta

A S Koski será eternamente grato(a).
Exibir estatísticas:

Últimas 24 horas: 0

Últimos 7 dias: 0

Últimos 30 dias: 0

Duração total: 46