Rep: 121
7
4
I was doing a little research and I'm still unsure what can I use each of these tools for. From what I read, a vacuum chamber is used for removing air bubbles from a freshly laid LOCA and an autoclave is used to remove air bubbles from OCA.
Please confirm this info and add corrections.
Thank you.
Esta é uma boa pergunta?
Rep: 1,6 mil
12
5
3
The vacuum chamber(Laminator) is where it presses down on the fresh glass/OCA to evenly seal it. The autoclave pulls any remaining bubbles out. So, yes, you're correct. :)
Source: I refurbish LCD's everyday!
Esta resposta foi útil?
This item states that it can also be used to remove Loca bubbles http://www.ebay.co.uk/itm/281906259692
By vacuum chamber I meant a pot-like container, not a laminating machine with the gold plates.
That's what I meant, my apologies.
You would want something like this: https://www.youtube.com/watch?v=RyZ2y4rI...
Últimas 24 horas: 0
Últimos 7 dias: 0
Últimos 30 dias: 6
Duração total: 468
Can you replace autoclave by hot gun
por Mohamed Kaba