Ir para o conteúdo principal

Model A1419 / Late 2012 / 2.9 & 3.2 GHz Core i5 or 3.4 GHz Core i7 Processor, ID iMac13,2

330 Perguntas Visualizar todos

4sns 1 c0000008 tl0p 124

Hi I am getting 4sns 1 c0000008 tl0p 124 hard test error. The CPU usage over 400%

Update (08/24/2016)

I have changed the hard drive and bought owc cable + sensor as u adviced

Update (08/24/2016)

ok thanks a lot Mayer jan ( SSD upgrade and kernel_task )

Respondido! Ver a resposta Também tenho esse problema

Esta é uma boa pergunta?

Pontuação 1
2 comentários

Did you change the hard drive?

por

I thought I recognized you. Let's delete this question and go back to the original. There was a months lapse between what I advised and your response and I missed it.

por

Adicionar um comentário

4 respostas

Solução escolhida

The problem was with the LCD sensor, no hdd sensor need for kernel_task problem. The HDD sensor is only for fans.

Esta resposta foi útil?

Pontuação 0
Adicionar um comentário

Is the fan running fast and making very loud. If so, you make to reorient a wire. It is either a heat senser or fan sensor wire.I don't remember the exact name. It has white dot on the conector. You need to turn it 180* from how it was before installed your new hard drive. Infix it has a very good guide that explains it.

Esta resposta foi útil?

Pontuação 0
Adicionar um comentário

There is a sensor cable on some iMac models that must be attached to the replacement HDD for the fans to operate normally. I do not recall if the particular models include your mid-2010 iMac but the symptom you describe would be consistent with this requirement.

If you did not buy it from OWC / MacSales or other well-known Apple supporter, it is unlikely to have the required hardware.

Check with OWC to determine the correct replacement you require.

It's an issue in your lower slot

Esta resposta foi útil?

Pontuação 0
Adicionar um comentário

Has anybody solved this mysterie ??

I have the same behaviour:

4sns 1 c0000008 tl0p 124

And a kernel tast taking 300% CPU load

Esta resposta foi útil?

Pontuação 0

1 comentário:

You may find using this app will help in locating which sensor is failing: TG Pro See what it shows you.

por

Adicionar um comentário

Adicionar a sua resposta

Vardan Hovsepyan será eternamente grato(a).
Exibir estatísticas:

Últimas 24 horas: 0

Últimos 7 dias: 0

Últimos 30 dias: 1

Duração total: 2,044