Rep: 1
1
I have the Philips #000 screwdriver from iFixit.
However, I seem to only be able to unscrew the 1.7mm screws. No luck with the smaller 1.2mm and 1.3mm screws. I am currently at this step.
Is this the expected scenario ?
Thanks in advance :)
Esta é uma boa pergunta?
Rep: 12,1 mil
11
28
6
Have you tried a little bigger driver? I normally use a 00 driver on iPhones.
Esta resposta foi útil?
Dang, I do not own a #00 driver. Will try to obtain one and see if it works.
Thanks for the info, I've been using #0 Phillips head on iPhones which is probably not optimal.
I got the screws out, used a screwdriver that I borrowed from a friend. Kinda disappointing that the ifixit screwdriver does not work..
Yeah sometimes I have to use the german phillips head screw driver that pretty much never gets worn out and works for philips head phone screws that are hard to take out.
i am having the same problem. Which screw driver did you get from your friend?
Últimas 24 horas: 0
Últimos 7 dias: 3
Últimos 30 dias: 9
Duração total: 2,597
