Why can't I screw the bottom right P2 screw back in place?

Question

iPhone 5c

O iPhone 5C da Apple foi lançado em 10 de Setembro de 2013. O reparo deste smartphone é similar aos modelos anteriores. Você precisará de chaves de Fenda/Philips/Torx 0.8 e espátulas de plástico. Disponível nas versões GSM ou CDMA / 8, 16, 32 GB / Branco, Rosa, Amarelo, Azul e Verde.

1233 Perguntas Visualizar todos

Rocco Lorusso @rok

Rep: 33

2

Postado: 27 de jun de 2016

Opções

Why can't I screw the bottom right P2 screw back in place?

Hi Guys! First of all thanks for all the support this great community provide.

I've got an issue with the loudspeaker of an Iphone 5c I'm fixing - sometimes it stops working- and I hardly suspect this is due to the lack of the bottom right P2 screw, which can't hold in place the speaker onto its contacts.

I've already bought new screws to replace the missing one, but when I've tried to screw it in place, it couldn't fit (I've also tried moving the original left one, into the right hole, but with the same result).

What can I do? Is there a replacing part for the P2 screws housing?

Thank you all!

Respondido! Ver a resposta Também tenho esse problema

Esta é uma boa pergunta?

Sim Não

Pontuação 0

Adicionar um comentário

1 resposta

Solução escolhida

Ben @benjamen50

Rep: 159,7 mil

Mtwo Perform

11

191

368

Postado: 27 de jun de 2016

Opções

Check the front display assembly at the lower part. There are two screw holes for the pentalobe screws. If one or more is missing, the missing sides will just have the screws spinning to nothing.

If they are both there then you will probably need to poke something through a bit then close then put the screen back in place and try again.

There is no easy replacement for the P2 pentalobe screw holes as they are part of the front display screen frame.

Esta resposta foi útil?

Sim Não

Pontuação 2

2 comentários:

Thanks for your answer! Is surely helpful :)

Luckly the display assembly seems to be fine, even 'cause the issues still remain without the display assembly...

May it be due to the lightning connector housing? in that case, is there a part just for it, or should I change all the connector?

28 de jun de 2016 por Rocco Lorusso

I doubt the dock connector would be at fault because it shouldn't obstruct where it goes unless the whole phone housing is badly damaged / bent at the bottom part.

28 de jun de 2016 por Ben

Adicionar um comentário

Thanks for your answer! Is surely helpful :)

Luckly the display assembly seems to be fine, even 'cause the issues still remain without the display assembly...

May it be due to the lightning connector housing? in that case, is there a part just for it, or should I change all the connector? — Rocco Lorusso
I doubt the dock connector would be at fault because it shouldn't obstruct where it goes unless the whole phone housing is badly damaged / bent at the bottom part. — Ben

iPhone 5c

Why can't I screw the bottom right P2 screw back in place?

1 resposta

Adicionar a sua resposta