Ir para o conteúdo principal

Asus X450JN BSOD after upgrading

Greetings,

I have just recently upgrade my Asus X450JN with these items :

2x8 RAM Corsair Vengeance DDR3L

SSD Samsung 850 Evo 250GB

I replace Optical Drive with original 1TB Toshiba HDD + HDD Caddy

Few days after, BSOD appear in my laptop, It won't even boot to installation media

Any insight on why it happened and hpw to fix it ?

Thanks and Regards

Responder a esta pergunta Também tenho esse problema

Esta é uma boa pergunta?

Pontuação 0
Adicionar um comentário

2 respostas

Pergunta mais útil

http://www.asus.com/US/support/FAQ/10039...

ASUS Haswell platform Notebook shipped with low voltage memory DDR3L(1.35V). If user want to upgrade the memory , please also choose low voltage memory DDR3L(1.35V). It will cause no boot when the notebook which shipped with low voltage memory DDR3L(1.35V) exchange the memory to standard voltage memory DDR3(1.5V).

The link above will show you how identify the difference.

This could be the problem causing BSOD

Esta resposta foi útil?

Pontuação 2

2 comentários:

I have confirmed that I used DDR3L, I suspect more on the SSD

Interesting update is that everything went normal after I try to check the drives using GParted booted from USB, it happened twice already since then and booting GParted somehow solves it, I just booted and then turn it off again, no changes are done

por

similar case..but didn't work after using GParted..need better solution..why only single slot memory were active not 2 slot?

por

Adicionar um comentário

hi my frend, I have the same pc, i´m looking to do the same. our laptop can take 16g ram ? will be very good, I boucht the same ssd and caddy cover.

the original slot of memory it´s 4g+4g ? or one of 8g ?

Esta resposta foi útil?

Pontuação 0
Adicionar um comentário

Adicionar a sua resposta

Heggi Ramatya será eternamente grato(a).
Exibir estatísticas:

Últimas 24 horas: 0

Últimos 7 dias: 1

Últimos 30 dias: 1

Duração total: 776