Ir para o conteúdo principal

2.2 GHz (Turbo Boost up to 3.4 GHz), 2.5 GHz (Turbo Boost up to 3.7 GHz), or 2.8 GHz (Turbo Boost up to 4.0 GHz) quad-core Intel Core i7 processor with 6 MB shared L3 cache.

768 Perguntas Visualizar todos

Question about foam stickers and plastic cover on battery

Hi

I have a simple and maybe trivial question. I have been following this guide: MacBook Pro 13" Retina Display Early 2015 Heat Sink Replacement

When I start to assemble my macbook again, am I supposed to put the foam stickers in step 8 and the plastic cover in step 4 on again? And if they are not sticky anymore, what do I do then?

Respondido! Ver a resposta Também tenho esse problema

Esta é uma boa pergunta?

Pontuação 0
Adicionar um comentário

1 resposta

Solução escolhida

I wouldn't worry about the battery sticker. The foam gives some impact protection. I'd put the on and hit with just a little heat from a hot air gun or even a hair dryers, not to much.

Esta resposta foi útil?

Pontuação 5

2 comentários:

Thanks i'll do that.

por

By any chance you know where I can get replacements for the foam stickers?

por

Adicionar um comentário

Adicionar a sua resposta

Anthony Le será eternamente grato(a).
Exibir estatísticas:

Últimas 24 horas: 0

Últimos 7 dias: 0

Últimos 30 dias: 1

Duração total: 309