Conserte seus objetos Comunidade Loja

The first model of iPhone, Model A1203 with 4, 8, or 16 GB capacity and an aluminum back. Repair requires a significant amount of prying, and may require some soldering. This page aims to help users troubleshoot, fix, and seek help for the iPhone 2G.

224 Perguntas Visualizar todos
Pergunta encerrada

Opções

I interrupted bootneuter while unlocking iPhone 2G...

I've already asked for help on this some posts down about my iPhone 2G being bricked and DFU restores and recovery mode restores both giving me error 23. I think I've narrowed down where I &&^&@@ up though which may help someone figure out a solution for me.

When I was unlocking the phone in redsn0w I interrupted bootneuter by rebooting which apparently is a SERIOUS do not do and now here we are... So if by some miracle someone else has had this issue and knows what to do.

Responder a esta pergunta Também tenho esse problema

Esta é uma boa pergunta?

Sim Não
Pontuação 0
Adicionar um comentário

1 resposta

Filtrar por:
Mais úteis Mais recentes Mais antigas
Pergunta mais útil

Opções

Try this:

Source (http://forum.gsmhosting.com/vbb/f631/iph...)

1. download redsn0w 0.9.4

2. unzip or unrar to specified folder

3. search and download for bootloader 3.9 and 4.6

4. search and download original stock ipsw 3.1.2

5. store all downloads in one folder

6. open redsn0w

7. find 3.1.2 ipsw

8. wait to load

9. click next

10. tick "already pwnd" , unlock and Install Cydia

11. make your 2G to be in recovery mode (fastest - power off, press and hold home button and plug USB)

12. wait until redsn0w 0.9.4 finished

13. wait to reboot iPhone 2G

14. wait to iPhone gets flashed with BootNeuter 2.1 (already installed in iPhone)

15. iPhone reboots itself and voila you got rid of error

Esta resposta foi útil?

Sim Não
Pontuação 1

1 comentário:

I've already tried that and it didn't work...

por

Adicionar um comentário
Exibir estatísticas:

Últimas 24 horas: 0

Últimos 7 dias: 0

Últimos 30 dias: 0

Duração total: 86