Ir para o conteúdo principal

Conserte seus objetos

Direito de executar reparos

Loja

Removing the Heat shields from the board

I am currently removing the heat shields from an iphone 6s to perform liquid damage cleanup. I am having trouble removing the larger heat shield that is right next to the battery connector. I have already mixed low melting solder with the solder that is holding the shield down, but I am still not able to get it to break free.

Any tips or help on how to remove this shield without causing damage to the board would be appreciated.

Responder a esta pergunta Também tenho esse problema

Esta pergunta é pertinente?

Pontuação 1
Adicionar um comentário

1 Resposta

Use a hot air gun.

Normally i use a hot air gun. 250 degrees C

hold the hot air gun vertically above the board. point it on the shield and do like a circular motion on top of it. after you do that for a bit use a tweezer and try to take the shield off every few secs. hope this helps

Esta resposta foi útil?

Pontuação 0
Adicionar um comentário

Adicionar a sua resposta

Elliot será eternamente grato(a).
Exibir estatísticas:

Últimas 24 horas: 0

Últimos 7 dias: 0

Últimos 30 dias: 1

Duração total: 163