Black bits on the connector pulled off during Digitizer replacement

Question

iPad 3 4G

Third generation of iPad, featuring 4G capabilities, released on March 16, 2012. Model number A1430. Repairs require heat and careful prying.

106 Perguntas Visualizar todos

J Lefo @juux

Rep: 9

1

Postado: 18 de fev de 2016

Opções

Black bits on the connector pulled off during Digitizer replacement

Hi all,

I'm trying to replace the touch screen on my iPad3 after I broke it.

When trying to remove the tape that was between the connector and the digitzer ribbon, the black bit on top of the connector came out with the ribbon...

See pictures here:

Picture 1

Picture 2

My question is: is this black bit important or can I replace it with something else or do I need to change the connector?

Thanks for your help

Respondido! Ver a resposta Também tenho esse problema

Esta é uma boa pergunta?

Sim Não

Pontuação -1

Adicionar um comentário

1 resposta

Solução escolhida

Mimi @imimimobile

Rep: 2,3 mil

7

5

1

Postado: 18 de fev de 2016

Opções

Hi J

You can try to put it on the top and seal it with something and see if it is going to work. If not you can replace the connector or just try to repair it. But this need to be there to make the connection.

Hope this help

Esta resposta foi útil?

Sim Não

Pontuação 1

8 comentários:

Hi Mimi,

Thanks for your answer. You mean put some black tape on top of the connector to replace the missing part?

18 de fev de 2016 por J Lefo

If you still have the part you need to try to put it in place like that the connections will merge. If you don't have the broken part just tape won't fix the problem you need to replace the connector or find the missing piece and put it back in place.

18 de fev de 2016 por Mimi

Great! Thanks a lot for your clarification

18 de fev de 2016 por J Lefo

No problem here to help.

If my answer is what you are looking for please mark it as answer accepted.

Thanks

18 de fev de 2016 por Mimi

Last question though, do you know a nice tutorial explaining how to change the connector or how to repair the top bit? (Can't find any good one google...)

Many thanks

18 de fev de 2016 por J Lefo

Exibir mais 3 comentários

Adicionar um comentário

Hi Mimi,

Thanks for your answer. You mean put some black tape on top of the connector to replace the missing part? — J Lefo
If you still have the part you need to try to put it in place like that the connections will merge. If you don't have the broken part just tape won't fix the problem you need to replace the connector or find the missing piece and put it back in place. — Mimi
No problem here to help.

If my answer is what you are looking for please mark it as answer accepted.

Thanks — Mimi
Last question though, do you know a nice tutorial explaining how to change the connector or how to repair the top bit? (Can't find any good one google...)

Many thanks — J Lefo

iPad 3 4G

Black bits on the connector pulled off during Digitizer replacement

1 resposta

Adicionar a sua resposta