Ir para o conteúdo principal

Model A1181: 1.83, 2, 2.1, 2.13, 2.16, 2.2, or 2.4 GHz Core 2 Duo processor

1203 Perguntas Visualizar todos

Looking For Pinouts for Sata Cable 820-2289-a

Hey guys! I've been looking everywhere for the wire configuration for of my old A1181 MacBook 13' laptop. I've included a few pics to make it a bit easier to know what i'm talking about.

I was just wondering If I could possibly make a Sata to USB connection myself. I have a data processor to run ith through in between now i just have to figure out if I can either use this one or look for something else. I found the computers schematics but it doesnt say much in terms of what the "k36 sata transfer board rev:a" does. anyone happen to know? any advice anyone?

Block Image

Block Image

Block Image

Block Image

Block Image

Respondido! Ver a resposta Também tenho esse problema

Esta é uma boa pergunta?

Pontuação 2
1 comentário

i have 4 yellow/gold wires and 2 blue wires and 3 red wires from a sata transfer board k36 i want to put a usb on it where do each wire goes on usb grnddata+ data- ,,POWER

por

Adicionar um comentário

1 resposta

Solução escolhida

SATA signaling is not directly compatible to USB ports. You need some conversion logic with your part is missing.

Esta resposta foi útil?

Pontuação 2
Adicionar um comentário

Adicionar a sua resposta

Manny O será eternamente grato(a).
Exibir estatísticas:

Últimas 24 horas: 0

Últimos 7 dias: 0

Últimos 30 dias: 2

Duração total: 184