Home Button Flex Cable Connector stuck in Home button Connector.
I went to replace my screen after breaking it a second time (I'm a klutz) and during this process the connector on the cable that connects the home button to the logic board broke from the cable and remains in the connector on the home button itself.
As I cannot replace the Home Button, my only option is to attempt to remove the connector. I have tried using tweezers but the package is too small. My next idea was to slightly heat the tip of my soldering iron and see if the connector will grip onto the tip of the iron. However if I break this button My iPhone is bricked and done so I wanted to see if you guys had any tips for me!
Sorry for the poor image quality but I don't have a camera available that can zoom in far enough.
Thanks!
Esta é uma boa pergunta?