Ir para o conteúdo principal
Pergunta encerrada

apple logo flashe then phone dies after battery and screen replacement

I recently replaced my iphone 6 battery and screen. after I did this the phone does not power on. when I plug it into the charger the phone turns on for a milisecond, turns off, and then turns back on for a milisecond, and this loop continues until I unplug the device. When I hold the home button + power button nothing happens. When I hold the home button and connect to itunes the phone starts to restore but then I get an error 9 message. I even went as far as putting the old screen and battery back in the phone and yet nothing happens.

Respondido! Ver a resposta Também tenho esse problema

Esta é uma boa pergunta?

Pontuação 0
Adicionar um comentário

1 resposta

Solução escolhida

your problem is battery,just replace it again.battery don't have voltage supply.

and also thats why you have error 9 .

even without battery,when you put your device on charger.

it reboot on apple logo only...

Esta resposta foi útil?

Pontuação 1

1 comentário:

This makes sense since nothing else seems to be the problem, I will try this and post my results. Thanks!

por

Adicionar um comentário
Exibir estatísticas:

Últimas 24 horas: 0

Últimos 7 dias: 0

Últimos 30 dias: 0

Duração total: 97