Touch screen is crazy! Help!

My iphone 5s touch screen is somewhat crazy it just opens apps and get down and up simultaniusly but if i twist the phone it goes normal. What can be that?? A faulty screen digitizer or the touch ic on the logic board?? Any help would be great

Thanks in advance

Respondido! View the answer Também tenho esse problema

Esta é uma boa pergunta?

Pontuação 0
Adicionar um comentário
Spread Fixmas Cheer
Get $12 off your purchase of $50 or more with code FIXMAS12
Spread Fixmas Cheer
Get $12 off your purchase of $50 or more with code FIXMAS12

4 Soluções

Solução escolhida

It's your display assembly. For whatever reason, it's gone faulty. If you're feeling gutsy. Here's labor

iPhone 5s Display Assembly Replacement

Here's parts

iPhone 5s LCD Screen and Digitizer

iPhone 5s LCD Screen and Digitizer Imagem

Produto

iPhone 5s LCD Screen and Digitizer

$0

Esta resposta foi útil?

Pontuação 1

Comentários:

I already changed the digitizer and still the same. When it doesnt work i twist the phone and it works again. I double checked connections and all are good and clean

por

Twist the phone? Now it's starting to sound like the touch IC

por

Yup thats the problem

por

Adicionar um comentário

There is a couple things it could be a faulty digitiser or a loose connector

Esta resposta foi útil?

Pontuação 0

Comentários:

I already changed the digitizer and still the same. When it doesnt work i twist the phone and it works again. I double checked connections and all are good and clean.

por

Adicionar um comentário

I am in the same boat, replaced the whole front digitizer assembly and phantom touches still are present. actually lost some functions with this as well.

Esta resposta foi útil?

Pontuação 0

Comentários:

*****Update***** after replacing my digitizer and the problem still persisted, it came down to the logic board. Buying the logic board was more than buying a used phone. I found a friend and bought his old phone instead.

por

Adicionar um comentário

Ok i took apart my phone and search on google about the problem and i found that for some reason the touch ic its not doing enough contact to the board. So cause i dont have any heat gun or tool to get to it i just mark the steel on top of it so it does a little pressure on the ic and now the touch is working. I will try later to get the metal top out and heat the ic to see if that resolve the problem for all cause im still getting some points with no touch.

Esta resposta foi útil?

Pontuação 0
Adicionar um comentário

Adicionar a sua resposta

jel2005 será eternamente grato(a).
Visualizar Estatísticas:

Últimas 24 horas: 0

Últimos 7 dias: 0

Últimos 30 dias: 0

Todo: 189