Rep: 97
4
4
Hello!
So I'm trying to get some stripped screws out of the bottom of an iPhone 6. And they are insanely stripped ... Is there a best method for getting them out? Drill? Dremmel?
Esta é uma boa pergunta?
Rep: 102,5 mil
18
191
304
If you have a dremel tool with a very fine cutting wheel you can make a slot in the head of the screw and take it out with a flat head screwdriver but you will end up marking your case
Esta resposta foi útil?
I like this idea but how do you trap/collect any metal shavings?
Rep: 215
2
The two methods I use are 1) use a rubberband between the screw and the screwdriver or two take an old screwdriver (like the ones you get with screen replacements) and super glue it to the screw, let it dry and then remove the screw. If all else fails, a screw tap will work.
Esta resposta foi útil?
Yeah, what he said. Also you could try different sizes of flat head screwdriver, and see if you can get those screws out of there
Rep: 57,5 mil
18
77
212
You mean the Penelope screws on the bottom, holding the display assembly into the phone?
Esta resposta foi útil?
Yes the pentalobe screws? What luck do I have in cleanly pulling off the screen if one or more of those screws is stripped.
Rep: 209
4
1
I use the tip of a craft knife. Works for me every time.
Esta resposta foi útil?
Últimas 24 horas: 0
Últimos 7 dias: 0
Últimos 30 dias: 0
Duração total: 338
