Ir para o conteúdo principal

Repair information for the 4th generation iPad. Released November 2, 2012. Model numbers: A1458, A1459, and A1460.

408 Perguntas Visualizar todos

Why won't my screen stay stuck?

I replaced the screen on my iPad 4. I cleaned all the old adhesive off with alcohol and let it sit for awhile to make sure it was gone. The applied the screen and let it sit for about an hour then turned it on for a minute to make sure it worked. Then let it sit for another few hour. Both times I weighted it with a couple text books. And repeated it a few more times and every time it peals up. Does anyone have any advice?

Respondido! Ver a resposta Também tenho esse problema

Esta é uma boa pergunta?

Pontuação 0
1 comentário

I tried but it didn't help.

por

Adicionar um comentário

1 resposta

Solução escolhida

I would try heating the new screen to allow the adhesive to bond better.

Esta resposta foi útil?

Pontuação 0
Adicionar um comentário

Adicionar a sua resposta

Kyle será eternamente grato(a).
Exibir estatísticas:

Últimas 24 horas: 1

Últimos 7 dias: 2

Últimos 30 dias: 2

Duração total: 55