After changing batteries, the camera will not power up every time. When this happens I open the battery cover, close it and it works. Now it will not power up at all.
Esta é uma boa pergunta?
Rep: 448,8 mil
11
366
1,4 mil
Hi,
Check to see if the terminals in the battery cover and in the battery compartment are clean. Use a cotton bud (Q-tip?) very lightly moistened with some Isopropyl Alcohol to gently rub the terminals clean. Also ensure that there is a bit of "tension" in the cover terminals, i.e. that you feel that the terminals will be gently pushed back by the batteries when the cover is closed.
Here is a link from Ifixit guide on how to remove battery cover to make it easier Canon PowerShot A1000 IS Battery Cover Replacement
Esta resposta foi útil?
Thanks for the tip. I examined the contacts and saw they did not need cleaning. I installed the batteries and the camera powered on. Keeping my fingers crossed.
Últimas 24 horas: 0
Últimos 7 dias: 0
Últimos 30 dias: 0
Duração total: 207
