Call Center Headsets Customer can not hear them on income calls

When you have a lot of devices (Bluetooth and/or WiFi) the environment can be very noisy (radio waves). You may need to monitor the Bluetooth frequencies and place the receivers away from each other.

Esta resposta foi útil?

Sim Não

Pontuação 1

2 comentários:

Thanks Dan I will see what I can find out from Plantronics... and that is what I was thinking that there were so many that maybe that was what the conflict was ... Not so sure how I would place the receivers away from each other.. they have very small desk and all sit right next to each other...

But thanks so much for your help .. I will see what I can do .

24 de set de 2015 por Glenda

When you have desks back to back in a call center it does become difficult to isolate physically the receivers. Plantronics should have some guideline documentation to help you. There is software which you could run on a laptop to make it into a Bluetooth scanner if Plantronics can't offer any help here.

24 de set de 2015 por Dan

Adicionar um comentário

Dan that sounds interesting I will see what can happen with the software if Plantronics can not help.. Thanks again — Glenda
Thanks Dan I will see what I can find out from Plantronics... and that is what I was thinking that there were so many that maybe that was what the conflict was ... Not so sure how I would place the receivers away from each other.. they have very small desk and all sit right next to each other...

But thanks so much for your help .. I will see what I can do . — Glenda
When you have desks back to back in a call center it does become difficult to isolate physically the receivers. Plantronics should have some guideline documentation to help you. There is software which you could run on a laptop to make it into a Bluetooth scanner if Plantronics can't offer any help here. — Dan