Ir para o conteúdo principal

Mid 2009 Model A1278 / 2.26 or 2.53 GHz Core 2 Duo processor EMC 2326

745 Perguntas Visualizar todos
Pergunta encerrada

Replaced DC-in Power Board, now MacBook Pro won't power up

Followed this guide to replace a burned out DC-in (magsafe) power board on my 2009 MacBook Pro. That seemed to go well, as now the charger indicates a solid (charging) orange light. But...

Now the computer won't start up. It's as if it has no power at all. No sound. No fans. Nothing. Can't figure out what I did wrong.

Responder a esta pergunta Também tenho esse problema

Esta é uma boa pergunta?

Pontuação 0
Adicionar um comentário

1 resposta

I have seen a MBP with one of the DC-in power board wires stuck between the case and the clip for the LCD cable causing a short, resulting in the same problem as you are seeing now.

It might be worthwhile to check if all the wires of the new board are free from the case.

Esta resposta foi útil?

Pontuação 0
Adicionar um comentário
Exibir estatísticas:

Últimas 24 horas: 0

Últimos 7 dias: 0

Últimos 30 dias: 0

Duração total: 104