I am replacing the digitizer on my ipad 2. On the tutorials it states there are 4 different models. cdma, gsm, emc2415 and emc, 2560. are all of the digitizers the same for all of these models or does it have to be specific.
Esta é uma boa pergunta?
Rep: 2 mil
6
9
1
As far as I know, all iPad 2 digitizers are compatible with one another. I've never had to buy one by model number.
Esta resposta foi útil?
Indeed, when it comes to the front panel of the iPad 2, it's one model fits all.
Not true, make sure what chipset you have, either you have the A5 chip or the A5X chip. They are completely different on the inside and different flex cable for all the components including the digitizer and lcd screen, the logic board is different also.
Rep: 13
1
Добрый день! Подскажите как я могу определить какая у меня модель именно по EMC. Так как у меня на задней крышке не указан EMC. У меня Ipad2 WiFi на 16 Гб. Можно ответить на email: Maks_rehayhyider@mail.ru Заранее спасибо.
Esta resposta foi útil?
Rep: 25
1
Not true! They have different type? Depending on what chip it has. If you have the A5 chip or the A5X chip make sure you know which one you have. A5 and A5X are completely different internal and are not compatible
Esta resposta foi útil?
Rep: 25
1
They look exactly the same on the outside but totally different on the inside. That’s what emc are for buy the correct parts. Also if you have the A5 chip or the A5X chip those are completely different internal also.
Esta resposta foi útil?
Últimas 24 horas: 0
Últimos 7 dias: 0
Últimos 30 dias: 3
Duração total: 1,338
