Ir para o conteúdo principal

Model A1046 or A1095 / 1280x854 screen resolution

118 Perguntas Visualizar todos

Replaced logic board now it doesn't boot past grey screen

I bought refurbished logic board that was said to have come directly from Apple as surplus. It looked great in original Apple bag. I installed the board and before I put the top case down, since it is the most difficult part of the process, I put in memory and the battery and pressed the power button. I got the bong sound from boot up but it just sits at a grey desktop. I don't get the Apple symbol and it does not come up.

Is there something else I have to do? Do I need to boot from the install DVD the first time? IF so what are the keyboard commands to do that I can't seem to get the right ones for this powerbook.

Any help is greatly appreciated.

Respondido! Ver a resposta Também tenho esse problema

Esta é uma boa pergunta?

Pontuação -1
1 comentário

Turns out it was the hard drive not spinning up. I fumbled it when putting it back in and dropped it about two inches to the desk, which shouldn't have hurt it but.....oh well. Guess I get an upgrade.

Thanks for the quick responses.

por

Adicionar um comentário

2 respostas

Solução escolhida

I would try resetting the PMU and PRAM before doing anything else. I am including a link on resetting. Good luck. Ralph

http://support.apple.com/kb/HT1431

http://support.apple.com/kb/HT1379

Esta resposta foi útil?

Pontuação 2
Adicionar um comentário

Also, be sure to check the display data cable's connection to the logic board (indicated in step 21 here). The display data cable provides picture, so a grey screen can be indicative of a bad connection.

Esta resposta foi útil?

Pontuação 2

1 comentário:

Sound advice--if the resets don't work recheck the connection. Ralph +

por

Adicionar um comentário

Adicionar a sua resposta

Craig Beveridge será eternamente grato(a).
Exibir estatísticas:

Últimas 24 horas: 0

Últimos 7 dias: 0

Últimos 30 dias: 0

Duração total: 1,045