Ir para o conteúdo principal

4 inch display / Available in a variety of colors / Released in 3 different models / 16, 32, or 64 GB capacity

331 Perguntas Visualizar todos
Pergunta encerrada

Problem with screen replacement image too high /\ components problem?

It's an A1509 ipod (16GB, no camera)

A picture is worth a thousand words so you'd understand the problem ... I haven't tried to restore or else by itunes because I can't unlock the device (because desactivated) to authorize/rely the ipod (I dunno how to say in english when it's the first time you connect device to a computer) and home button isn't working anymore ^^ thanks for help !

pic 1

pic 2

the touch screen seems to be ok because when i press in the right place of cancel button in the bottom it works ....

the vertical seems to be too high (well a zoom but only on the height ...)

Update

Ok, my friend told me that it wasn't drop in water, but may be some mud on it, I've found a little dirt over some components, I've "cleaned" with a needle ... and turn on again, not helped ... :P :( help please !

http://imgur.com/JgED2TX

Responder a esta pergunta Também tenho esse problema

Esta é uma boa pergunta?

Pontuação 0

1 comentário:

Anyone for help ? ^^ if it's not working anymore without changing a component tell me so :P :)

por

Adicionar um comentário

1 resposta

tap the screen three time with 4 fingers.

Esta resposta foi útil?

Pontuação 0

2 comentários:

Are you serious ? You well see that's not a zoom ! And it's with 3 fingers normally.

(And I've already tested this of course !)

por

Please I need help for this !

por

Adicionar um comentário
Exibir estatísticas:

Últimas 24 horas: 0

Últimos 7 dias: 0

Últimos 30 dias: 0

Duração total: 95