Ir para o conteúdo principal

Model M7572 / 400 or 500 MHz G3 processor

45 Perguntas Visualizar todos

512 RAM installed on bottom of processor card; computer won't start

I followed the install directions carefully to replace 256 RAM with 512 RAM. Installed it on the bottom of the processor card but now the computer won't power up.

Is something not seated properly?

Respondido! Ver a resposta Também tenho esse problema

Esta é uma boa pergunta?

Pontuação -1
5 comentários

probably

por

I decided to go back and put the 256RAM back on the bottom. I put the 512 on the top.

This time when I attempted to boot, I got the normal tone and things sounded right but the screen is black. Not home free yet.

por

Real easy to not seat the cpu board fully.

por

rj713 - your comment was right on. I went back and attempted to reseat the cpu board fully. Powerbook G3 booted normally and I can see 768RAM now. THANKS!

On to the hard drive replacement!

por

You should mark this post as solved somehow.

por

Adicionar um comentário

1 resposta

Solução escolhida

Reseat the cpu board. Ralph

Esta resposta foi útil?

Pontuação 2
Adicionar um comentário

Adicionar a sua resposta

eodted será eternamente grato(a).
Exibir estatísticas:

Últimas 24 horas: 0

Últimos 7 dias: 0

Últimos 30 dias: 0

Duração total: 1,287