Complete how-to and replacement guides for the original iPhone, iPhone 3G, iPhone 3GS, iPhone 4, iPhone 4s, iPhone 5, iPhone 5c, iPhone 5s, iPhone 6, iPhone 6 Plus, iPhone 6s, iPhone 6s Plus, iPhone 7, iPhone 7 Plus, iPhone 8, iPhone 8 Plus, iPhone X, iPhone XS, and iPhone XS Max.

29915 Perguntas Ver todas

Soldering U2 (what tools needed?)

Hello everyone,

I would like to start micro soldering, i have phone compagny but sometime we broke some chip during repair.

What is all tool needed for remove U2 chip and replace with new one ( i already have the new U2)

Can someone explain me how to desoldering and how to soldering back, which method is the best ?

Thanks

Respondido! View the answer Também tenho esse problema

Esta é uma boa pergunta?

Pontuação 0
Adicionar um comentário

GIVE TOOLS. FIX FOREVER.

GIVE TOOLS.

FIX FOREVER.

Spread the Fixmas cheer.

GIVE TOOLS. FIX FOREVER.

Spread the Fixmas cheer.

3 Soluções

Solução escolhida

Hey,

You'll need to start off by getting a good soldering iron, something along the lines of a Hakko, then you will need decent flux, and decent solder at different widths, for smaller stuff go with the thinner soldering wire, try and make sure it's multicore solder as that also contains flux in the solder and helps a lot. A good reflow station will be needed for sure. You will definitely need a decent microscope to, you can't do it by eye, as the chips are so tiny! If you do plan on soldering a lot, you'll more than likely need a fume extractor, as the fumes from soldering are bad for health.

Hope this has helped. :)

Esta resposta foi útil?

Pontuação 2
Adicionar um comentário

Tools only:

Hotairstation/Reworkstation

Soldering Iron

Solder

Flux

fine quality tweezers (also important)

Changing the u2 chip is one of the easier IC's to change but still not the place to learn micro soldering.

Practise and get to know your tools on dead boards until you know how to remove parts without destroying the whole board.

Esta resposta foi útil?

Pontuação 0
Adicionar um comentário

PPD120E or good soldering iron

Esta resposta foi útil?

Pontuação 0
Adicionar um comentário

Adicionar a sua resposta

Phonetech93 será eternamente grato(a).
Visualizar Estatísticas:

Últimas 24 horas: 2

Últimos 7 dias: 11

Últimos 30 dias: 52

Todo: 1,514