Ir para o conteúdo principal

Released alongside the AirPort Extreme base station, this hard drive equipped variant offers 802.11ac speed on a time capsule NAS.

56 Perguntas Visualizar todos

Want to know how the Status light wired for Time Capsule A1470

I'd received damaged AirPort Time Capsule A1470. The status light's 3 electrical wires and 3 pin connector were cut. The only "3 wires" are left inside. I wanna know how those wires connected to the logicboard.

Thanks in advance.

Block Image

Responder a esta pergunta Também tenho esse problema

Esta é uma boa pergunta?

Pontuação 0
Adicionar um comentário

1 resposta

Pergunta mais útil

They connect to the logic board J1700 connector which is just to the right side of the power supply connector. Here's a good picture of the connectors: Step 4 image from this teardown: AirPort Extreme A1521 Teardown which is it twin without the hard drive.

Esta resposta foi útil?

Pontuação 1

1 comentário:

On my Airport Extreme, the pin closest to the J1700 lable is common to the status LED, the middle pin is to the yellow and the farthest from the J1700 lable is t the green.

por

Adicionar um comentário

Adicionar a sua resposta

Mai Ichijoh será eternamente grato(a).
Exibir estatísticas:

Últimas 24 horas: 0

Últimos 7 dias: 0

Últimos 30 dias: 1

Duração total: 299