Rep: 125
2
I think I need to replace the backlight filters. I've read plenty about where they are on the iPhone 5 but can't find anything on the iPhone 5s. Can anyone tell me where they are on the board and where I can buy them? Is this all I will need to replace or should I also replace the coil and ic chip.
Thank you in advance!!
Esta é uma boa pergunta?
Rep: 782,1 mil
1,1 mil
893
2,3 mil
I'd check around FL24, FL25, FL26 as well as the capacitors C17, C243 and C18.
Esta resposta foi útil?
Thank you! This was exactly what I was looking for. Do you know where I can buy the filters and capacitors?
Looks like they are all in stock a digikey.com
Thanks oldturkey03. Is this the part for the filter? FILTER CHIP 120 OHM 3A 0603
Found it (I think) - FERRITE CHIP 220 OHMS 2.0A 0603
susan, the three filters are 240 OHM 0.2A 0.8 OHM in a 0201 (0603 metric) package. Available at places like this http://www.digikey.com/product-detail/en...
Rep: 85
1
Probably not the cheapest solution, but perhaps consider replacing the entire display assembly, digitizer en all. It's a Much Much easier job.
Esta resposta foi útil?
I already tried that. I can see the apple logo, barely, using a flashlight pointed at the display, so I think the backlight filter is blown. I'm up for replacing it/them. Can solder, just don't know where they're located. Plenty of info on the iPhone5, not much on the 5s.
Thanks!
Últimas 24 horas: 0
Últimos 7 dias: 0
Últimos 30 dias: 0
Duração total: 2,307
1 comentário
You have micro soldering skills and tools?
por Rany