No service after taking apart.

Question

iPhone 3GS

Versão renovada do iPhone 3G com velocidades de processamento mais rápidas. O reparo deste dispositivo é semelhante ao do 3G e requer simples chaves de fenda e ferramentas de abertura. Modelo A1303 / 8 GB,16 GB ou 32 GB de capacidade / Parte traseira em plástico preto ou branco.

1500 Perguntas Visualizar todos

brandon @brandon67611

Rep: 1

1

Postado: 29 de jun de 2010

Opções

No service after taking apart.

I took my iPhone apart to replace the vibrator and i then got confident and readjusted the power button becuase it wasnt right, i then couldnt get it working forever but finally got it and now i get HORRIBLE service. before where i got 5 bars and 3g im barley getting 1 bar and E. i dont know what it could be. my only guess is the number 7 connector because it doesnt seem to hook up right. any help would be awesome. everything els works fine thou just bad service. Thank you all in advance,

Respondido! Ver a resposta Também tenho esse problema

Esta é uma boa pergunta?

Sim Não

Pontuação -1

Adicionar um comentário

2 respostas

Solução escolhida

markus weiher @markusweiher

Rep: 35,1 mil

140

71

53

Postado: 29 de jun de 2010

Opções

your right - if no. 7 isn't connected well, the reception could be bad - but it's a fragile part - be careful not to break the connector!

try to connect it properly (i know that sounds not "nice" - but i would do that for you if you bring it, but in my case - i'm from germany and that would be a to long distance for the most ifixit users ;-) )

Esta resposta foi útil?

Sim Não

Pontuação 0

4 comentários:

ok the problem is the numer 7 doesnt seem to connect right, it wont snap on there at all. i think it might possibly be broken. is there anyway i can fix that or do i have to get new parts? thanks for all your help

30 de jun de 2010 por brandon

that depends where it's broken - cable side or logic board side? - but if it's broken, it should look "odd"

30 de jun de 2010 por markus weiher

I think both sides are messed up, it wont snap together but i tried holding them together hopeing that it would show some reception but it didnt do anything.

2 de jul de 2010 por brandon

if one of the sides has lost it's contact - you won't have any signal. i did only find the antenna on ebay,changing the part on the logicboard would involve soldering (but in that case, some "guerilla's" simply using 2 small wires and soldering the dock antenna contacts to the opposite side on the antenna, the cables should be long enough to open the phone again and work "freely" with it - but thin enough to get hidden inside the phone

2 de jul de 2010 por markus weiher

Adicionar um comentário

ok the problem is the numer 7 doesnt seem to connect right, it wont snap on there at all. i think it might possibly be broken. is there anyway i can fix that or do i have to get new parts? thanks for all your help — brandon
that depends where it's broken - cable side or logic board side? - but if it's broken, it should look "odd" — markus weiher
I think both sides are messed up, it wont snap together but i tried holding them together hopeing that it would show some reception but it didnt do anything. — brandon
if one of the sides has lost it's contact - you won't have any signal. i did only find the antenna on ebay,changing the part on the logicboard would involve soldering (but in that case, some "guerilla's" simply using 2 small wires and soldering the dock antenna contacts to the opposite side on the antenna, the cables should be long enough to open the phone again and work "freely" with it - but thin enough to get hidden inside the phone — markus weiher

james labonville @jameslabonville Rep: 1 · Answer 1 · 2012-04-03T12:19:14-07:00

james labonville @jameslabonville

Rep: 1

Postado: 3 de abr de 2012

Opções

yeah i have the same problem but i can snap my number 7 in place but i still get one bar some times 3 but thats only at my house if i go any were els i get noting

Esta resposta foi útil?

Sim Não

Pontuação 0

Adicionar um comentário

iPhone 3GS

No service after taking apart.

2 respostas

Adicionar a sua resposta