Ir para o conteúdo principal

A segunda geração do iPad com modelos Wi-Fi, GSM e CDMA. Alguns modelos foram atualizados antes do iPad 3. O reparo é difícil e requer procedimentos de calor e separação.

729 Perguntas Visualizar todos

screen slide not working

Just replaced the screen and LCD. Before I glued the screen I wanted to try it to make sure everything worked. Unit turns on but the "slide to unlock" doesn't work. All the other buttons seem to work. Could I have gotten a bad screen from IFIXIT?

Respondido! Ver a resposta Também tenho esse problema

Esta é uma boa pergunta?

Pontuação -1
1 comentário

after playing around it seems that the top portion works but the bottom, and the key pad do not. I thought the digitized was included with the screen.

por

Adicionar um comentário

1 resposta

Solução escolhida

sounds like you don't have the ribbon cable that comes from the LCD pushed in far enough. make sure it is pushed in all they way to the dotted lines meet the top og the female end and that you have the clips up while pushing it in and all the way down after wards.

Esta resposta foi útil?

Pontuação 0

1 comentário:

That plus adding tape to the back side of the connector solved the problem. Thanks

por

Adicionar um comentário

Adicionar a sua resposta

sammann será eternamente grato(a).
Exibir estatísticas:

Últimas 24 horas: 0

Últimos 7 dias: 0

Últimos 30 dias: 0

Duração total: 77