Rep: 73
2
1
Was plugging in power ribbon to zif connector on motherboard when it (the ziff connector) broke off the motherboard. How can I get this fixed or is it bye-bye motherboard?
Esta é uma boa pergunta?
Rep: 109
3
2
this is what my tablet looks Like without the ZIF connector,
and the other picture is of the connector actually broken.
Esta resposta foi útil?
I'm in the same boat. Connector broke exactly the same way. Any luck? Also, I don't have the charging cable on hand (repairing for a friend, they had no clue what they were doing), is it possible to power the tablet on using AC power alone?
Same issue anyone get and answer? I noticed on the pic of new mobo it doesn't have the connector on it D:
wher to buy that connector
Rep: 1
1
ny jumpering on board will be appericiated?
Esta resposta foi útil?
Rep: 67
4
2
That Zif connector just holds the ribbon cable in contact with pins. You can try cutting off a sliver of plastic from a credit card and wedging it in there to hold the ribbon to the connector. I have done this with my laptop when the zif socket for my keypad broke. It takes a very thin piece to do so. Then take some captons tape or other electrical tape and place it over the socket to ensure it stays.
Esta resposta foi útil?
Últimas 24 horas: 0
Últimos 7 dias: 0
Últimos 30 dias: 5
Duração total: 889
1 comentário
Can you please upload a picture?
por David F