Ir para o conteúdo principal

Model A1311 / Late 2009 / 3.06 or 3.33 GHz Core 2 Duo processor

309 Perguntas Visualizar todos

Display flashes briefly with chime and computer boots up?

iMac Intel 21.5 inch-EMC-2308

Imac started to boot up with the chime and the display would flash briefly and then go to black. For a while I was able to put the iMac in target mode and run repair permissions from another laptop, but I can't do this anymore. I tried a new power supply and that did not solve the problem.

Respondido! Ver a resposta Também tenho esse problema

Esta é uma boa pergunta?

Pontuação -1
Adicionar um comentário

1 resposta

Solução escolhida

The flashing and going black sounds like an LED Backlight Board issue to me. I'd hook it up to an external monitor, boot from the original system installation disk, run disk utilities.

Apple Part #661-5304

iMac Intel 21.5" EMC 2308 LED Driver Board Replacement

Esta resposta foi útil?

Pontuação 0

2 comentários:

Thanks! I cannot get the external monitor to show anything but black. I am not sure if I am using the correct key sequence to enable the external monitor or do I need one?

por

If your computer is generating a video signal you don't need to do anything to activate an external monitor. No external signal would indicate a video card failure. In the upper right corner of this link shows the part number you may want: http://www.welovemacs.com/mb950lla.html

por

Adicionar um comentário

Adicionar a sua resposta

eyounken será eternamente grato(a).
Exibir estatísticas:

Últimas 24 horas: 0

Últimos 7 dias: 0

Últimos 30 dias: 0

Duração total: 121