Rep: 318
8
1
2
After I turned the power button on the label maker seems to go blank after trying to type. I try pressing buttons, printing etc, but nothing appears on the screen.
Esta é uma boa pergunta?
Rep: 99
5
2
Check to see if the batteries are installed correctly. Also the batteries possibly are drained and need to be replaced. Also if you use a Ac adapter check to see if it is plugged in and pushed into the label maker correctly.
Esta resposta foi útil?
Últimas 24 horas: 1
Últimos 7 dias: 1
Últimos 30 dias: 3
Duração total: 288
Had the same problem but the suggested solutions did not work. Batteries were new, and the AC adapter was plugged in.
por Donald Burzler