Rep: 25
2
1
My cat knocked my 3DS XL off of a dresser while it was charging, and the piece inside of the charging port is now bent. The charger can go in if I wiggle it a little bit, and the system is getting a charge, but the more i use the system, the more I notice that the charger easily comes out. It used to firmly stay it. How do I fix this?
Esta é uma boa pergunta?
Rep: 71
1
1
Best bet would be replace the charging port, this requires disassembling the device and desoldering the old port, then soldering a new one, it's not as hard as people think as long as you have basic soldering skills. :]
Esta resposta foi útil?
Could you link me to a guide if possible? I've never opened a 3DS (other than to replace battery.) Also a link to where I can buy a charging port. I can't seem to find one.
The charging plug.
http://www.amazon.com/Socket-Connector-C...
And for a guide just search on youtube. :D
Heck, you don't even need basic soldering skills. Fixing one of these was the first thing I had ever soldered.
Can’t I just bend it back into my place I have the same issue but don’t want to risk breaking the device
Esta resposta foi útil?
Últimas 24 horas: 2
Últimos 7 dias: 6
Últimos 30 dias: 26
Duração total: 8,478
