Ir para o conteúdo principal

Measure hardware home button. Internals are OK.

Isn't the home button just short circuiting the two pins?

Should't i be able to measure that on the flex cable from the home button? When i press the button, it should shot circuit right? Nothing happens :-/ Tried some old reference screens i had, same result.

If i short circuit the two pins in the iPhone with a screwdriver or anything metal, it works.

Respondido! Ver a resposta Também tenho esse problema

Esta é uma boa pergunta?

Pontuação -1
2 comentários

Ordering new home button flex, hopefully that will solve my problem.

por

New flex did the job. Apparently the new screen came with a dead home button flex :(

por

Adicionar um comentário

1 resposta

Solução escolhida

Try bending the two metal prongs up slightly if they are to low then they won't make contact with the home button

Esta resposta foi útil?

Pontuação 0

1 comentário:

Tried it, no success :-/

por

Adicionar um comentário

Adicionar a sua resposta

Klaus M será eternamente grato(a).
Exibir estatísticas:

Últimas 24 horas: 0

Últimos 7 dias: 0

Últimos 30 dias: 0

Duração total: 111