Ir para o conteúdo principal

Second generation of iPhone. Model A1241 / 8 or 16 GB capacity / black or white plastic back. Repair is more straightforward than the first iPhone. requires screwdrivers, prying, and suction tools.

1158 Perguntas Visualizar todos

Why can't I hear the caller's voice after replacing the battery?

I was able successfully to replace the battery in my 3G iphone following the IFIXIt instructions and everythings seem to work just fine until someone call me and I can't hear the caller's voice but the caller can hear my voice. Did I misplace a cable connector? Thanks.

Responder a esta pergunta Também tenho esse problema

Esta é uma boa pergunta?

Pontuação 1
Adicionar um comentário

1 resposta

Your earpiece speaker might had gotten shifted during the battery replacement.

Make sure its two contacts are touching where they are suppose to be. The earpiece speaker is located on the front screen. Here is the guide to it.

Esta resposta foi útil?

Pontuação 0

1 comentário:

Thanks for the suggestion. I checked the earpiece and it was fine. It turned out that the cable #3 was not properly secured and it came loose. After I re-installed the cable, it is working fine now. Thanks again. I appreciate all the help.

por

Adicionar um comentário

Adicionar a sua resposta

dbenwong será eternamente grato(a).
Exibir estatísticas:

Últimas 24 horas: 0

Últimos 7 dias: 2

Últimos 30 dias: 12

Duração total: 1,912