Hey, I just fixed the power button issue (I replaced it by new one) but now I have a bigger problem: When I tried to switch the iPhone on the screen is staying black. The power button works and the iPhone turns indeed on but I can't see anything. Do you have any idea what I might did wrong when I disambled my phone?
With kind regards
Esta é uma boa pergunta?
Rep: 37,6 mil
22
51
42
Either the connections are not seeded or the screen has gotten damaged during disassembly.. Did you take the screen out when changing the power button?
Esta resposta foi útil?
thanks for your answer! no I did not touch the screen at all. I "just" removed the logic board and put it back ;)
A new display is what you need mate
Excuse me? I need a new display, since I might bond the screen flex cable?
Rep: 37,6 mil
22
51
42
That's your problem then you need to remove the screen to get at the screws of the power button bracket not fold the lcd flex cables this is were you have damaged the cables..
The lcd cables should never be folded forward like that ;)
Esta resposta foi útil?
ok !@#$ it :-/
soo... What's next?
Rep: 37,6 mil
22
51
42
Últimas 24 horas: 0
Últimos 7 dias: 0
Últimos 30 dias: 0
Duração total: 124
