Ir para o conteúdo principal

Modelo A1502 / processador 2,4, 2,6 ou 2,8 GHz de dois núcleos / Lançado em outubro de 2013

552 Perguntas Visualizar todos

Where are the power-on jumpers on a mid-2013 MacBook Pro logic board?

PLEASE HELP TO LOCATE THE POWER JUMPER ON A MACBOOK 2013 13" Retina DISPLAY

--------------------------------------------------------------------------------

Where are the power-on jumpers on a mid-2013 MacBook Pro logic board?

--------------------------------------------------------------------------------

I'm trying to locate the power-on jumpers on the logic board of Early-2013 13" MacBook Pro

Retina Display.

I have disassembled and cleaned all components after I had a liquid spill on the KB, I found out the liquid spill didn't have enough time to reach the logic board and computer seems to be charging ok. I suspect the keyboard is damaged but want to start computer to run a systems check.

Responder a esta pergunta Também tenho esse problema

Esta é uma boa pergunta?

Pontuação 1
Adicionar um comentário

1 resposta

vlajimmy jean, most of the newer models do not use jumper pads. You have to shorten two contacts on the keyboard connector. Lets see if we can find out which ones. It should be connector 5 shortened to ground.

Esta resposta foi útil?

Pontuação 0

1 comentário:

Thanks for your reply.

I dont want to mess up the logic board, do you have a picture or smtg that can show me more details about how to do it.

Thank You Very Much.

por

Adicionar um comentário

Adicionar a sua resposta

vlajimmy jean será eternamente grato(a).
Exibir estatísticas:

Últimas 24 horas: 0

Últimos 7 dias: 0

Últimos 30 dias: 1

Duração total: 869