Conserte seus objetos Comunidade Loja

Model A1224 / Mid 2007 and Early 2008 / 2, 2.4, or 2.66 GHz Core 2 Duo processor

548 Perguntas Visualizar todos

Opções

Logic Board or Power Supply or Hard disk Failure?

Hi all,

My iMac EMC 2210 is unable to boot at all.

Trying to find out whether it's a logic board or power supply failure.

I have just replaced my hard disk approximately 1 year ago but I am not writing it off the equation.

Pressed the power button but has no chime nor visual.

I could hear the fan sound (but couldn't be sure if it's the fan or hard disk).

Any guidance is greatly appreciated.

Respondido! Ver a resposta Também tenho esse problema

Esta é uma boa pergunta?

Sim Não
Pontuação -1
4 comentários

Update / Additional Info

I left the iMac off for a couple of hours and managed to boot it for now.

Is it overheating ?

por

Can you give us the last three digits of your systems serial number so we can correctly identify your system.

por

Hi Dan,

Thanks for the prompt reply.

Last 3 digit of serial is ZE3

Model 1224 , EMC 2210.

Didn't manage to use Temperature gauge pro due to my comp is officially dead once more.

por

Apple iMac "Core 2 Duo" 2.66 20-Inch (Early 2008) Specs

Identifiers: Early 2008 - MB324LL/A - iMac8,1 - A1224 - 2210

por

Adicionar um comentário

1 resposta

Filtrar por:
Mais úteis Mais recentes Mais antigas
Solução escolhida

Opções

To check if the system is over heating you'll need to install an app which can read the fan & temp sensors in your system. Give this app a try: Temperature Gauge Pro There are others but I have found this one to be one of the best. Let us know what you find after running it.

Esta resposta foi útil?

Sim Não
Pontuação 1

10 comentários:

Hi Dan, Thanks for the prompt reply. Last 3 digit of serial is ZE3 Model 1224 , EMC 2210. Didn't manage to use Temperature gauge pro due to my comp is officially dead once more.

Chee Yong Koo, 11 hours ago

Apple iMac "Core 2 Duo" 2.66 20-Inch (Early 2008) Specs Identifiers: Early 2008 - MB324LL/A - iMac8,1 - A1224 - 2210

por

Starting to should like your power supply has issues. At this point I think you'll need to open the system up to inspect things. Are you up to that? Review the IFIXIT guides and setup your work area if you haven't already.

por

Yes, I am ready to open up. Any guide is appreciated.

por

Thanks for the guide.

I have no issues replacing the hardware as required but the main issue here is that I couldn't rectify if it is a Power Supply failure or Logic Board.

Any ideas?

por

Exibir mais 5 comentários

Adicionar um comentário

Adicionar a sua resposta

Chee Yong Koo será eternamente grato(a).
Exibir estatísticas:

Últimas 24 horas: 0

Últimos 7 dias: 0

Últimos 30 dias: 1

Duração total: 273