Ir para o conteúdo principal

iPhone de quarta geração lançado em 2010. O reparo é simples, mas o vidro frontal e o LCD devem ser substituídos juntos, como uma unidade. GSM / 8, 16 ou 32 GB de capacidade / Modelo A1332 / Preto e Branco.

2375 Perguntas Visualizar todos

Top and bottom of frame is bent outwards

My stepson's mom just got this iPhone 4 for him used and when it wouldn't stay connected to the charger I started looking at it and the top and bottom of the aluminium frame is bent outwards.

The phone is fully functional otherwise, it charges fine if the connector is pushed against it, just seems like the frame is preventing a proper connection.

Is this simply the frame that is bent, or could some internal problem be causing this?

Photos:

http://i.imgur.com/hfMKvfT.jpg

http://i.imgur.com/vVwxBZl.jpg

Responder a esta pergunta Também tenho esse problema

Esta é uma boa pergunta?

Pontuação -1
Adicionar um comentário

2 respostas

Pergunta mais útil

No it wouldn't be the frame it's most likely charging port that's faulty could could try picking dust and dirt out of it to see if it makes any difference..

Esta resposta foi útil?

Pontuação 1
Adicionar um comentário

This iphone has obviously been involved in a very nasty smash sometime in the past which has damaged the chassis. If you take it apart you'll probably find the screen/back have been replaced before. Looking at your pictures yes the frame will be stopping the charger going all the way in.

Best option would be to get a new chassis/frame for it and fit it.

Esta resposta foi útil?

Pontuação 0
Adicionar um comentário

Adicionar a sua resposta

rosahildur será eternamente grato(a).
Exibir estatísticas:

Últimas 24 horas: 0

Últimos 7 dias: 0

Últimos 30 dias: 0

Duração total: 90