Conserte seus objetos Comunidade Loja

Second generation of iPhone. Model A1241 / 8 or 16 GB capacity / black or white plastic back. Repair is more straightforward than the first iPhone. requires screwdrivers, prying, and suction tools.

1158 Perguntas Visualizar todos

Opções

What do the numbered ribbon cables do specifically?

I recently replaced a cracked display, and also a battery in my iPhone 3G. Worked great for a few weeks until the white screen of death started to appear when I press the menu button or the power button. Lately it is getting worse. I can get the display to work with persistance, but it's a pain.

I am wondering if maybe one of the cables is loose or something. I have taken it a part a few more times and disconnected and reconnected a few of the ribbon cables, (helps a little bit- but the white screen eventually returns) but I would like to know what ribbon cable corresponds to the display, or what part I can look at to see if maybe I reconnected it poorly.

anyone?

Respondido! Ver a resposta Também tenho esse problema

Esta é uma boa pergunta?

Sim Não
Pontuação 3
2 comentários

Is this the part you're talking about? iPhone 3G/3GS Headphone Jack Assembly

por

no, I mean the ribbon cables that are labeled 1, 2, 3, 4, 5 and 6. like this one, for example:

http://s1.guide-images.ifixit.com/igi/pw...

por

Adicionar um comentário

4 respostas

Filtrar por:
Mais úteis Mais recentes Mais antigas
Solução escolhida

Opções

Cable 1 LCD display

Cable 2 Touchscreen sensor and home button

Cable 3 earpice speaker and proximity sensor

4,5,6 are I believe GPS, antenna and camera cables.

That is what I can tell by opening it up.

Esta resposta foi útil?

Sim Não
Pontuação 6

6 comentários:

You are correct about most of them- However, 4,5 & 6 are actually dock connector, headphone/volume/power/vibration, and antennas, respectively. :)

por

Good to know Josh.

por

Very strange, I snapped part of the volume rocker cable (as we know connected to the earphone jack and power) now my home button isnt working, what do you think is up with that!? any help? thanks :)

por

This was very helpful. I am the kind of person who likes to check things before finishing up. I had the screen lose before tightening the last two screws and tried testing it but the home button was not working.

The reason the home button was not working was because it is connected once you push the screen in closed.

Once again, very helpful and good information. Thanks!

por

Exibir mais 1 comentário

Adicionar um comentário

Opções

the home button has it's own contacts that connect when the device is closed, it isn't fed through ribbon cable 2

Esta resposta foi útil?

Sim Não
Pontuação 4

2 comentários:

quite right, well spotted! +

por

I would advise people to be careful when opening and closing their iphone's, as i managed to break the little contacts off (both of them) and had to solder two small wires bent in a "U" shape, to replace the functionality of the previous contacts.

por

Adicionar um comentário

Opções

Although the home button is a separate entity and connects upon closing, if cable four is disconnected the it will not work.

Esta resposta foi útil?

Sim Não
Pontuação 0
Adicionar um comentário

Opções

sometimes the ribbon on the display lcd goes bad and you will get a white screan. replace full assemble should work . i had the same problem replaced the full lcd srean and it works great. good luck.

Esta resposta foi útil?

Sim Não
Pontuação 0
Adicionar um comentário

Adicionar a sua resposta

James Elston será eternamente grato(a).
Exibir estatísticas:

Últimas 24 horas: 1

Últimos 7 dias: 2

Últimos 30 dias: 10

Duração total: 72,459