Rep: 25
2
1
The hard drive of my MacBook 13" Aluminum Unibody recently died on me, and i'm in need of a replacement. I'm not hardware-savvy so i apologize if this is a silly question, but am I able to purchase any internal hard drive and self-install? Or are there certain models and/or storage limits that i'm bound by?
Thanks!
Esta é uma boa pergunta?
Rep: 685,2 mil
3,4 mil
1,1 mil
2,6 mil
Here's a list of SATA drives that will work for you: http://www.ifixit.com/Mac-Parts/MacBook-...
Here's how to install it: MacBook Unibody Model A1278 Hard Drive Replacement
Esta resposta foi útil?
Rep: 1,5 mil
14
5
3
Any 2.5" SATA internal Hard Drive can be used with this model of MacBook! They are available at a reasonable price pretty much anywhere hardware is sold, including right here on iFixit!
Esta resposta foi útil?
I tried a WD5000LPVX 500GB 2.5" SATA and when I booted the system the disk utility could not find it. I put back the old failed drive and it recognized it so I know its not the SATA Cable (even though the old drive cannot be restored or refomated etc.). Not sure why this new HD cannot work with my Macbook.
Esta resposta foi útil?
It is probably formatted to Windows file system EXT3, try formatting it to FAT32 on another system, Linux will usually do a good job of this.
This is a long shot but would you know the original HDD model? I have a failed HDD i'm trying to recover, but I can't recall the original model to take parts from.
Esta resposta foi útil?
Últimas 24 horas: 0
Últimos 7 dias: 2
Últimos 30 dias: 17
Duração total: 24,771
