my home button has been less responsive even after calibration and cleaning so I suspect that the ribbon cable is to blame. Since it is held on by adhesive and taking the old broken one off would remove said adhesive, do I need to worry about the new cable not adhering, if so what adhesive should I use?
Esta é uma boa pergunta?
Rep: 2,9 mil
8
10
5
Any replacement cable worth buying will have the adhesive already on it. Just be sure that you purchase from a good source, such as the one here.
Esta resposta foi útil?
Rep: 2 mil
6
2
1
No, normally the adhesive will come off with the flex.
Esta resposta foi útil?
Últimas 24 horas: 0
Últimos 7 dias: 0
Últimos 30 dias: 0
Duração total: 192
