Ir para o conteúdo principal

Conserte seus objetos

Direito de executar reparos


Fourth generation of iPad, released November 2, 2012, available in 16, 32, or 64 GB models. Model Number A1458

232 Perguntas Visualizar todos

I mistook the home button ribbon cable connector

I have broken off the square 5 wire connector next to the home button ribbon cable, and all the soldered leads are no longer attached. How to repair?

I have attached two pictures from the guide. I mistook the connector as the picture was a little too small to see, only after "prying up the flap" did I discover I pried up the soldered connector.

Is this repairable or have I junked my new iPad 4th ten pride and joy?

Here are pictures where the connector is shown as right next to the cable connector…

Block Image

Block Image

Responder a esta pergunta Também tenho esse problema

Esta pergunta é pertinente?

Pontuação 1
Adicionar um comentário


Save by fixing with an all-in-one kit.

Shop iPhone Fix Kits


Save by fixing with an all-in-one kit.

Shop iPhone Fix Kits

1 Resposta

The connector can be replaced but the leads may need to be re-routed. It is a difficult repair, you could ruin it further if not done carefully

Esta resposta foi útil?

Pontuação 0


I just found a repair service who will solder a new connector to my logic board for $50 plus shipping. Will advise once I have it back in house.


Adicionar um comentário

Adicionar a sua resposta

Al Taylor será eternamente grato(a).
Exibir estatísticas:

Últimas 24 horas: 0

Últimos 7 dias: 0

Últimos 30 dias: 1

Duração total: 402